Pleasant Grove Utah Radon Removal & Mitigation System Installation
Licensed General Contractors · Professional Radon Mitigation · Serving Pleasant Grove & Utah County
⚠️
Radon is the #1 cause of lung cancer in non-smokers — and Utah ranks among the nation’s highest-risk states.
🏗️
Licensed General Contractors — we bring real construction expertise to every radon mitigation installation in Pleasant Grove.
✅
We aim to reduce every home’s radon levels well below the EPA’s 4 pCi/L action level and back every job with a post-installation test.
Radon Mitigation System Installation in Pleasant Grove, Utah
Pleasant Grove is at the base of Mount Timpanogos in the heart of Utah Valley — the steep Wasatch terrain and thin soil cover make Pleasant Grove homes particularly susceptible to radon intrusion. Utah consistently ranks among the states with the highest average indoor radon levels, and Utah County homes are no exception. If you’ve tested your home and received a result at or above 4 pCi/L — or even if you haven’t tested yet — Utah Radon Removal is here to help.
As licensed general contractors, we install complete sub-slab depressurization (SSD) radon mitigation systems from start to finish — drilling, pipe routing, fan mounting, sealing, and post-installation testing. We serve Battle Creek Canyon area, Grove Creek, Manila, Lindon border, and Canyon Crest communities.
What’s Included in Every Installation:
- Sub-slab suction point drilling — strategically placed beneath your foundation slab
- Schedule-40 PVC pipe routing — clean, professional pipe runs inside or outside
- High-performance radon exhaust fan — continuous, quiet operation, vented above roofline
- Liquid-tight electrical connection — code-compliant wiring by our licensed contractors
- U-tube manometer gauge — so you can verify system operation at any time
- All penetrations sealed — hydraulic cement and polyurethane caulk on every hole
- Post-installation radon test — we verify results before we leave your Pleasant Grove home
Why Pleasant Grove Homeowners Choose Utah Radon Removal
🏗️ Licensed General Contractors
We hold a Utah general contractor license — not just a radon certification. We understand building science, foundation systems, and code compliance in Utah County.
🌟 Expert Workmanship
We take tremendous pride in clean, professional-looking installations. Every pipe run is carefully planned, neatly routed, and properly sealed — in Pleasant Grove homes and across all of Northern Utah.
⚡ Same-Day Installation
Most Pleasant Grove radon mitigation system installations are completed in a single visit — typically 2 to 4 hours. We schedule promptly and arrive on time.
📍 Local Utah Experts
We’re a Utah-based company that knows Utah County homes, soil conditions, and building styles. We serve Pleasant Grove and the surrounding communities of Lindon, Orem, American Fork, Highland, and northern Utah Valley.
📈 Post-Installation Testing
Every installation includes a post-mitigation radon test. Our systems consistently bring Pleasant Grove homes well below the EPA’s 4 pCi/L action guideline — and if results need improvement, we make it right.
💰 Upfront, Honest Pricing
No hidden fees, no upsells. We give you a clear quote for your Pleasant Grove home based on foundation type and layout before we schedule anything. Call for a free estimate.
The Radon Risk in Pleasant Grove, Utah
Radon is a naturally occurring radioactive gas produced by the decay of uranium in soil and rock. It is colorless, odorless, and tasteless — completely undetectable without proper testing equipment. In Pleasant Grove, the geology means radon levels in homes are often above the national average. The only way to know your home’s radon level is to test it.
The EPA recommends action at 4 pCi/L or above, and even levels between 2–4 pCi/L may warrant mitigation — especially for families with young children or anyone with respiratory concerns. Radon typically enters Pleasant Grove homes through:
- Cracks in concrete slab floors and walls
- Construction joints and gaps around pipes
- Hollow-block foundation walls and crawl spaces
- Sump pump pits and floor drain openings
- Exposed soil in unfinished basement areas
Our Installation Process in Pleasant Grove
- Free Phone Consultation — Tell us your Pleasant Grove home’s test results and foundation type. We’ll advise you honestly and provide a ballpark quote at no charge.
- On-Site Assessment (if needed) — For complex layouts, we schedule a quick walkthrough to plan the optimal system design.
- Same-Day System Installation — Our crew arrives with all materials and completes the full mitigation system in one visit, typically 2–4 hours.
- System Pressure Verification — We confirm proper sub-slab depressurization using the manometer before wrapping up.
- Post-Mitigation Radon Test — A test device placed after installation confirms your Pleasant Grove home’s radon levels have dropped.
- Long-Term Support — We’re a local Utah company. Questions months later? Just call — we stand behind every installation.
Recent Radon Mitigation Installations Near Pleasant Grove
A sample of our work — clean, professional installs we’re proud of.
Get Your Free Pleasant Grove Radon Mitigation Quote Today
Ready to protect your Pleasant Grove home and family? Contact Utah Radon Removal today. We serve Pleasant Grove ZIP codes 84062 and all surrounding Utah County communities.
Call or text — we respond fast
Email us — we typically reply within a few hours
Radon FAQs for Pleasant Grove, Utah Homeowners
How much does radon mitigation cost in Pleasant Grove, Utah?
Most installations in Pleasant Grove and Utah County range from $800 to $1,500 depending on your foundation type and system complexity. Contact us at 801-645-7297 or utahradonremoval@gmail.com for a free, no-obligation estimate.
Is radon a serious problem in Pleasant Grove?
Yes. Pleasant Grove is at the base of Mount Timpanogos in the heart of Utah Valley — the steep Wasatch terrain and thin soil cover make Pleasant Grove homes particularly susceptible to radon intrusion. Utah ranks among the top states for indoor radon, and Utah County communities like Pleasant Grove frequently see test results above the EPA’s 4 pCi/L action level. Testing and mitigation are strongly recommended.
How long does installation take in Pleasant Grove?
Most full radon mitigation system installations in Pleasant Grove are completed in a single day — typically 2 to 4 hours. We bring all equipment and materials, complete the work, and clean up before leaving.
Do you serve all of Utah County?
Yes — we serve all of Utah County, including Lindon, Orem, American Fork, Highland, and northern Utah Valley and beyond. If you’re in the Pleasant Grove area or anywhere across Northern and Central Utah, give us a call at 801-645-7297.
Also Serving Nearby Communities
American Fork · Lindon · Orem · Cedar Hills · View All Utah Service Areas